Defenition of the examiner or examining body as per EN 287

[Marat Nurbekov]

Dear Memmbers,

 

I would like to clarify defenition of the examiner or examining body as per EN 287.

As per EN 287 point “10 Certificate” "the certificate shall be issued under the sole responsibility of the examiner or examining body" and there is no any definition in EN 287 who can be an Examiner or an Examining body(IIW,TWI,EWF).

How I understood the definition of Examiner/Examining Body is that person/organisation who is acceptable for the company. Am I right?

Thanks and Regards

Marat Nurbekov.

[Prakash Gotimukul]

Examining body in the context of PED means NoBo which authorised to witness and certify for welding procedures n welders

Rgds

Prakash Gotimukul

ASME AIS, Technical Manager ASME/ISO/PED

 gpraka...@gmail.com.

Tel: +9714 2778511 Mob:+97152 979 5678

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f97925eb-c69c-439c-950d-b75c77d03e80%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Kannayeram Gnanapandithan]

As per ISO 15607, Examinar--person who has been appointed to verify compliance with applicable standard. ,in certain cases, an external independent examinar can be required.

Examining body--organization that has been appointed to verify complience with the applicable standard.

 in certan cases, independant external examining body can be required

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

--

[George Dilintas]

This standard has been replaced by EN 9606-1

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOUP4qKpXgmLx%2BZAi7Z-aX6B9%3DCH-NsZ0_D9%2BqSHCEqoWmA0gA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

[prem_nautiyal26]

Hi

Refer EN ISO 9606-1 for welder qualification. 

EN 287 is withdrawn since October 2015.

Certificate to be issued by Notified Body.

Regards

Prem Nautiyal

9769316004

Sent from Samsung Mobile