Welder performance for Temper Bead Welding
Karthikeyan Muthuvel
pgoswami
Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist.
Saudi Aramco
Approved-Designated Project Welding Representative (DPWR).
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions w.r.t.
applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups
"Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAL7K%3D_%2BqTaAvJofJjv7KraxBMufM0ZmpsLPTpQ2%2BRSqKrzkrtw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
pgoswami
Hi Karthikeyan,
The default rule is ASME Sec-IX, QW-290. If the applications are for pipelines, then you need to follow the guidelines of Piping Research Council(PRCI) also as additional resource.
Where this technique would be applied, and what’s the grade of steel in question?
Appreciate your response.
Thanks.
Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist.
From:
material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Karthikeyan Muthuvel
Sent: Monday, December 26, 2016
7:02 AM
To: material...@googlegroups.com
Subject: [MW:25843] Welder
performance for Temper Bead Welding
Dear Experts,
--
George Dilintas
Hi Karthikeyan,
The default rule is ASME Sec-IX, QW-290. If the applications are for pipelines, then you need to follow the guidelines of Piping Research Council(PRCI) also as additional resource.
Where this technique would be applied, and what’s the grade of steel in question?
Appreciate your response.
Thanks.
Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Karthikeyan Muthuvel
Sent: Monday, December 26, 2016 7:02 AM
To: materials-welding@googlegroups.com
Subject: [MW:25843] Welder performance for Temper Bead Welding
Dear Experts,
Could you please clarify the mentioned subject, is it necessary to qualify the welders to perform the Temper Bead weld. If yes, what is the procedure/method for qualifying the welders.
Thank you,
Karthikeyan M
QA/QC Team
Al-Muzain, Saudiarabia.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAL7K%3D_%2BqTaAvJofJjv7KraxBMufM0ZmpsLPTpQ2%2BRSqKrzkrtw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA5rYMdESrHU2r7z2aNylU0sKAAAAQAAAAwO8LScbCWUq3VhJVHFdX5AEAAAAA%40quickclic.net.
For more options, visit https://groups.google.com/d/optout.
Loganathan M
Kannayeram Gnanapandithan
This message is eligible for Automatic Cleanup! (Dear all,We have problem in aluminum welding Material is 5083 and filler matel is ER5556, Gas purity gas 99.999%welding qualification getting major porosity. Please kindly give any precaution steps.
On Monday, 26 December 2016 15:03:48 UTC+3, Karthikeyan Muthuvel wrote:
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/98f97647-609e-450e-a85c-9d840fc1bd8b%40googlegroups.com.