Sub size Impact test value

[naz0...@gmail.com]

Sir,

Can anyone explain to me is this impact value correct or not for MDMT -8.5 Deg C. Materials is P No-1 Group No-2. Applicable code API-650 Edition 2013.

 

Regards

Naz

[SHANMUGA PERUMAL]

Dear naz,
Refer API 650 section 9 paragraph 9.2.2.5.
Thanks,
Regards,
G.S.Perumal.

On 2/11/16, naz0...@gmail.com <naz0...@gmail.com> wrote:
>
>
>
> Sir,
>
> Can anyone explain to me is this impact value correct or not for MDMT -8.5
> Deg C. Materials is P No-1 Group No-2. Applicable code API-650 Edition
> 2013.
>

> <https://lh3.googleusercontent.com/-H3E6XxXMvzQ/VryMZ6nq_TI/AAAAAAAAAAQ/mmcjnune8Oo/s1600/12.jpg>
>
>
>
>
>
> Regards
> Naz
>
> --
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-weld...@googlegroups.com.
> To post to this group, send email to material...@googlegroups.com.
> Visit this group at https://groups.google.com/group/materials-welding.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/7b403a36-28c6-4bd5-a8a6-c03c01f3a9e0%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>