Request for Consumable Estimation Sheet for GTAW/SMAW Pipeline Welds

[Masud Hamza]

Hello everyone, I hope you are all doing well.

I am seeking technical assistance in developing a welding consumable estimation format for pipeline fabrication.
For reference, consider the following joint configuration:

• Pipe Size: 16-inch

• Wall Thickness: 12.7 mm (XS)

• Welding Process: GTAW (root & hot pass) followed by SMAW (fill & cap)

I would appreciate a standardized consumable-calculation template—preferably in Excel or PDF—to accurately determine filler metal requirements, deposition rates, joint volume, and allowable tolerances for this type of weld.

Thank you in advance for your support and technical guidance.

Best Regards

MD MASUD RANA

QA-QC Inspector(Welding & Piping)

Mechanical Engineer.

Pipeliners Limited.

Bibiyana Optimization Project (Turbo Expander)

Contact NO: 01738-862988

[Magesh Kumar]

Dear  MD MASUD RANA

Please check it

With Regards,

M.Magesh kumar

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAN5jLqKkgmzagA_RDervEtaK_OCHw5LqfcpC7OdX5HGtDWuTfw%40mail.gmail.com.