pre heat inconel-625
95 views
Skip to first unread message
Ali Zarasvandi
Jun 19, 2016, 12:04:55 PM6/19/16
to Materials & Welding
hi
do we need preheat of electrode when using inconel-625
C.Muni
Jun 20, 2016, 7:06:30 AM6/20/16
to material...@googlegroups.com
Its not preheating.Its baking.Its required.Follow as per manufacturer guidelines.
Regards,
Go where you are celebrated not where you are tolerated.
Comfort is the enemy of achievement.
Muniyandi Chithiran MBA.,MIIF,
AWS Certified Welding Inspector,
ISO 9001,14001,17025, Lead Auditor,
NDT Level II-RT,UT,MT,PT,
Mobile: 0091 95855 40965,99947 65591
Go where you are celebrated not where you are tolerated.
Comfort is the enemy of achievement.
On Sat, Jun 18, 2016 at 6:50 PM, Ali Zarasvandi <ali.zar...@gmail.com> wrote:
hido we need preheat of electrode when using inconel-625
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/e9e2daff-7d56-4611-aa40-97edced03eef%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
zakir ali
Jun 20, 2016, 7:06:48 AM6/20/16
to material...@googlegroups.com
Yes...
These electrodes are basic coated.
And hygroscopic in nature...
Sent from RediffmailNG on Android
Rajnish Dixit
Jun 20, 2016, 10:45:46 PM6/20/16
to material...@googlegroups.com
Dear Ali,
The term 'baking or drying' is used for heaing of the electrodes before starting welding.
You have to refer Manufacturer's recommendations & ASME Section II Part C for reference.
Regards,
Rajnish
--------------------------------------------
The term 'baking or drying' is used for heaing of the electrodes before starting welding.
You have to refer Manufacturer's recommendations & ASME Section II Part C for reference.
Regards,
Rajnish
--------------------------------------------
On Sat, 6/18/16, Ali Zarasvandi <ali.zar...@gmail.com> wrote:
Subject: [MW:24973] pre heat inconel-625
To: "Materials & Welding" <material...@googlegroups.com>
Date: Saturday, June 18, 2016, 5:20 PM
Subject: [MW:24973] pre heat inconel-625
To: "Materials & Welding" <material...@googlegroups.com>
George Dilintas
Jun 21, 2016, 10:26:47 PM6/21/16
to Meghanadh K
Baking or not depends on the kind of coating (in case of covered electrodes)
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMJSSYk1WW%3DE%3DJ8teKioUXmzL3DE8rDSKe91Nxgn0VFUvpcXdg%40mail.gmail.com.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
Reply all
Reply to author
Forward
0 new messages