Acceptance of Excess weld/ hump/ protrution in Weld overlay

27 views
Skip to first unread message

Muhammed Ibrahim PK

unread,
Jun 20, 2022, 5:58:04 AM6/20/22
to material...@googlegroups.com
Gents,

Could you please advise the acceptance criteria for excess weld / circumferential hump / protrusion in weld overlay of API5LD weld overlay pipes?
Visual inspection criteria addresses under thickness of 0.8 mm only. it does not say about circumferential humps acceptance limit.


Thanks & Regards
Muhammed Ibrahim PK
Reply all
Reply to author
Forward
0 new messages