welding of HARDOX 500 to CS Plates

[Hani Al Masry]

Dear All 

which electrode can be used for welding of HARDOX 500 to CS Plates 

Regards,

H.A 

[Aditya Gujar]

Dear Sir,

As per the Hardox manufacturer recommendation, you may go for AWS E307 type of welding consumable without any preheating. 

Regards,

Aditya Gujar

Essen Welding Alloys Pvt. Ltd.,

www.essenwelding.com 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzc0WxOA%3DF3ft98VJOenqO_X6SN0WMmJMVNeOE4Va9d0pw%40mail.gmail.com.

--

--

 

Aditya Gujar

Sales Manager

Essen Welding Alloys Pvt. Ltd.,

Pune, India.

 

Tel: 91 20 65781493

Mob: 91 9850958075

---

[Rahul Rathod]

For joining or build up?

--

[Hani Al Masry]

THANKS , WHAT IS THE EQUIVALENT TO USE SMAW OR FCAW? 

DO WE NEED ALSO TO DO BUILD UP (HARDFACING) FOR THE WELDING FINAL WELDING LAYERS AFTER JOINING? 

Regards,

H.A 

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANaNbfk-6HupPMwqAmGETuqG8e%2BNxphHyG3FMQGR4c-2ARnVgg%40mail.gmail.com.

[LALIT VADADORIYA]

Dear sir,

It depends on the plate thickness because if the thickness of hardox 500 is more in that case chemical composition changes due to hardness. (like NI for less thick ni-0.2 for high ni-1.5, mo .25 to .6, cr 1 to 1.4)

Regards

Lalit Vadadoriya

Mob.9377072930

On Mon, Mar 15, 2021 at 9:12 AM Hani Al Masry <hanyo...@gmail.com> wrote:

--