Jacket piping

[PRASANTH RAJAN]

Dear experts    

  Is it possible for welding of jacket outer pipe on the  the inner pipe flange , its there any standard that allow the welding of pipe in forged material

--
WITH REGARDS
 
*PRASANTH RAJAN*
*MECHANICAL SUPERVISOR*
*GALFAR ENGINEERING EMIRATES*
*prasant...@gmail.com* <prasant...@gmail.com>
 

[Srinivasulu Kalasapati]

Yes,

We will get reducing flanges, in sulfur lines we will be using and in chilled water/brine water jacketing also used.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKCULh5fjVmbvFdPkmqpg3%3DB1WNAU9v%2BfB_bkoML1p-1oiXD6w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Ohm Guru Namasivaya

[Hemant W Joshi]

Yes it is, the flanges are to be prepared accordingly.

---

From: material...@googlegroups.com <material...@googlegroups.com> on behalf of PRASANTH RAJAN <prasant...@gmail.com>
Sent: 25 November 2015 07:17
To: material...@googlegroups.com
Subject: [MW:23926] Jacket piping

 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKCULh5fjVmbvFdPkmqpg3%3DB1WNAU9v%2BfB_bkoML1p-1oiXD6w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

----------------------------------------------------------------------------------------------------------
Information transmitted by this E-MAIL is intended only for the use of the addressee(s) and contains information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination and or copying of this email in any manner is strictly prohibited and you are requested to delete this e-mail immediately.
Communicating through e-mail is not secure and capable of interception and delays. Any one communicating with TATA Consulting Engineers Ltd., and / or its subsidiaries or associates or group companies by e-mail accepts the risks involved and their consequences.
While this e-mail has been checked for all known viruses, the addressee should also scan for viruses and notify the originator of e-mail.
---------------------------------------------------------------------------------------------------------

[PRASANTH RAJAN]

Any specified standards or is there any where mention that normal weld neck flange cannot be used in jacket piping

[Srinivasulu Kalasapati]

Look into PIP or the company standards for which you are doing the project

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKCULh5q5NE-CpwbQYqsubEw%3D2eaFAAdb6TxeSJ8Mrv66%2BNHiA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--

Ohm Guru Namasivaya

[PRASANTH RAJAN]

Any specified standards or is there any where mention that normal weld neck flange cannot be used in jacket piping

On Wednesday 25 November 2015, PRASANTH RAJAN <prasant...@gmail.com> wrote: