Weld rejection rate for welders

[Ganesh R nair]

Dears,

As per SAEP - 324, linear weld rejection rate for welder is 0.2% max. But as per SAES W-10, maximum weld repair rate for welder is 2%. Which is correct. I am attaching screen shot of SAEP-324 and SAES W-10. Please advice.

Thanks & Regards,

Ganesh R

[Pham Thanh Tinh]

Sir.

Targeted performance criteria on Weld Rejection Rate (WRR) for Welder and Welding Operator is 0.2% on linear method and 5% on weld joint method, with linear method being the over-riding factor. From the performance data the welders shall be categorized based on the linear Weld Repair Rate (WRR) as detailed in Appendix I. 

Vào Th 2, 12 thg 6, 2023 vào lúc 06:07 Ganesh R nair <ganesh...@gmail.com> đã viết:

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJ_8oJVEM1gb7b6ahL6ma0%3DndfA247w5OwNyOVKE73aidhdz3A%40mail.gmail.com.

--

Best & Regard

Pham Thanh Tinh

QC Manager

China National Chemical Engineering Third Co.LTD

South Ghawar Gas Separation Plant & Associated Facilities Project

Email: tinh...@gmail.com / ph...@sinotcc.com

Mobile phone +966. 556802308 

[Kannayeram Gnanapandithan]

based on product like plates, 0.2%, For tubular products--2%

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ISO 9712 Level 2 in VT,

ASNT-Level II in PT,MT,RT & UT,

LA ISO 9001-2015,

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

--

[Moossa Kutty]

This is misticken , actually 0.2 only

--

[Kannayeram Gnanapandithan]

is it possible for manual welding

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ISO 9712 Level 2 in VT,

ASNT-Level II in PT,MT,RT & UT,

LA ISO 9001-2015,

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKgLv_8JKmfYJQRHdgpMU0PmVEE-5Rs9ZviMM31p_7he3vyH0A%40mail.gmail.com.

[haas mread]

dear sir,

Please tell me where it is mentioned "based on product like plates, 0.2%, For tubular products--2%".

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eO%3DrUkKjAzmDUZCRy5XRYfEW%3Deax%3DC13a8356PKf0ttrA%40mail.gmail.com.