Hardness Value For the P-91 and SS material.

[pradip kumar Sil]

Dear Everybody,

How much is Lower & Upper  hardness limit with code reference for the weldment of  ASTM-A-335 Gr. P-91 To A312 TP 316 with filler combination ER-Ni Cr3.

Regards,

Pradip

[Kannayeram Gnanapandithan]

Hardness only on HAZ of P91 is to be around 230Hv

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8n-WNLDxx1b6%3Daqu_my_rTKo8HKme9cWQsamH5NKVJMbQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[dili...@gmail.com]

According to the bibliography min hardness on P91 should be 191 HV

Sent from my BlackBerry 10 smartphone.

From: Kannayeram Gnanapandithan Sent: Τετάρτη, 31 Αυγούστου 2016 - 08:38 To: materials-welding Reply To: material...@googlegroups.com Subject: Re: [MW:25334] Hardness Value For the P-91 and SS material.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNaPwK%3DOZMxuh0ZPWExJGYeu7qY%3D7thZ6JkX7X2oCVNiQ%40mail.gmail.com.

[J Prinsen]

Don't weld P91 directly to Stainless steel,
Embrittlement off one or both of the materials will be your part, depending on the PWHT.

 

This is a serious warning

 

 

JPrinsen MSc, IWE

 

 

---

Van: dili...@gmail.com
Aan: "Kannayeram Gnanapandithan" <material...@googlegroups.com>, "materials-welding" <material...@googlegroups.com>
Verzonden: Donderdag 1 september 2016 15:42:00
Onderwerp: Re: [MW:25339] Hardness Value For the P-91 and SS material.

According to the bibliography min hardness on P91 should be 191 HV

Sent from my BlackBerry 10 smartphone.

From: Kannayeram Gnanapandithan Sent: Τετάρτη, 31 Αυγούστου 2016 - 08:38 To: materials-welding Reply To: material...@googlegroups.com Subject: Re: [MW:25334] Hardness Value For the P-91 and SS material.

Hardness only on HAZ of P91 is to be around 230Hv

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Tue, Aug 30, 2016 at 9:59 AM, pradip kumar Sil <prad...@gmail.com> wrote:

Dear Everybody,

How much is Lower & Upper  hardness limit with code reference for the weldment of  ASTM-A-335 Gr. P-91 To A312 TP 316 with filler combination ER-Ni Cr3.

Regards,

Pradip

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8n-WNLDxx1b6%3Daqu_my_rTKo8HKme9cWQsamH5NKVJMbQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNaPwK%3DOZMxuh0ZPWExJGYeu7qY%3D7thZ6JkX7X2oCVNiQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20160901134200.6713430.77205.4290%40gmail.com.

[Kannayeram Gnanapandithan]

Embritlement is not a problem in this combination and filler, but there will sensitisation in 316 side at high temp of PWHT

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Thu, Sep 1, 2016 at 7:43 PM, J Prinsen <weld...@online.nl> wrote:

Don't weld P91 directly to Stainless steel,
Embrittlement off one or both of the materials will be your part, depending on the PWHT.

 

This is a serious warning

 

 

JPrinsen MSc, IWE

 

 

---

Van: dili...@gmail.com
Aan: "Kannayeram Gnanapandithan" <materials-welding@googlegroups.com>, "materials-welding" <materials-welding@googlegroups.com>

Verzonden: Donderdag 1 september 2016 15:42:00
Onderwerp: Re: [MW:25339] Hardness Value For the P-91 and SS material.

According to the bibliography min hardness on P91 should be 191 HV

Sent from my BlackBerry 10 smartphone.

From: Kannayeram Gnanapandithan Sent: Τετάρτη, 31 Αυγούστου 2016 - 08:38 To: materials-welding

Reply To: materials-welding@googlegroups.com

Subject: Re: [MW:25334] Hardness Value For the P-91 and SS material.

Hardness only on HAZ of P91 is to be around 230Hv

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Tue, Aug 30, 2016 at 9:59 AM, pradip kumar Sil <prad...@gmail.com> wrote:

Dear Everybody,

How much is Lower & Upper  hardness limit with code reference for the weldment of  ASTM-A-335 Gr. P-91 To A312 TP 316 with filler combination ER-Ni Cr3.

Regards,

Pradip

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8n-WNLDxx1b6%3Daqu_my_rTKo8HKme9cWQsamH5NKVJMbQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNaPwK%3DOZMxuh0ZPWExJGYeu7qY%3D7thZ6JkX7X2oCVNiQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20160901134200.6713430.77205.4290%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/17328743.23160343.1472739238467.JavaMail.zimbra%40online.nl.