Pls suggest what is acceptance criteria for wrinkles on Stainless steel elbow.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CABHGzEUoZU9Gk%3DQmNv3Tcm2VW3znE-X%2B%3DLUjbPaz%3D4irh9t8tg%40mail.gmail.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eN6nue0T-CCXmkXMR5TJ9kwi1QO2xAs08ikL9ODjLojCA%40mail.gmail.com.
Please refer ASME SEC II PART A, SA/A 403 clause no. 10
Mechanical marks deeper than 1.6 mm shall be removed and subjected to maintain thickness
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAE5Fvtf69nokfLsXsMJgwec4boyJt0WimotyTwf5xFN1n6kTkw%40mail.gmail.com.