How to read pressure vessel fabrication 2D drawings

[Shahil Saini]

Hello everyone, Happy New year to all of you,

I am a fresher in pressure vessel  fabrication field, can anyone help me to get the nice place from where I learn to read pressure vessel fabrication 2D drawings.

[Jamie Reyes]

Hello,

Not for sure how well versed you are with standards, but here you go.

ASME Y14.5 Standard, latest addition, would be a good starting point. www.asme.org

Happy reading, cheers!

The following are ASME Y14 Standards that are basic engineering drawing standards:

ASME Y14.1, Decimal Inch Drawing Sheet Size and Format 

ASME Y14.1M, Metric Drawing Sheet Size and Format 

ASME Y14.2, Line Conventions and Lettering

ASME Y14.3, Orthographic and Pictorial Views

ASME Y14.5, Dimensioning and Tolerancing

ASME Y14.24, Types and Applications of Engineering Drawings

ASME Y14.34, Associated Lists

ASME Y14.35, Revision of Engineering Drawings and Associated Documents

ASME Y14.36, Surface Texture Symbols

ASME Y14.38, Abbreviations and Acronyms for Use on Drawings and Related Documents

ASME Y14.41, Digital Product Definition Data Practices

ASME Y14.100, Engineering Drawing Practices

On Fri, Jan 1, 2021 at 11:19 PM Shahil Saini <sainis...@gmail.com> wrote:

Hello everyone, Happy New year to all of you,

I am a fresher in pressure vessel  fabrication field, can anyone help me to get the nice place from where I learn to read pressure vessel fabrication 2D drawings.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALfBO_9DW52Y030Q1q6%3Da%2BAdD_uK-N2N9%2BebtSfNk-nk_eyCpA%40mail.gmail.com.

--

Regards,

Jamie Reyes

J.R. Machine Company, Inc.

[José Juan Jiménez Alejandro]

In all the years that I have of experience (and I have been in ASME Audits) I have never seen that ASME Y14.5 is used for the engineering of Pressure Vessels, I suggest you see a tutorial on the internet, help you a friend who has more experience on the subject and in short: you have to be familiar with ASME BPVC Section VIII Div. 1, otherwise it will be very difficult for you to understand Pressure Vessels and their engineering.

Greetings and happy new year.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJNUtUNzqcvS2Ewprquv-5c3sxv_fgL7RTn-tXmaRxNAsHUM3Q%40mail.gmail.com.

--

Ing. José Juan Jiménez Alejandro

Independent Consultant in Parts

and Pressure Equipment

SUMMIT MÉXICO - TPI

https://www.linkedin.com/in/summit-m%C3%A9xico-tpi-760047137/

Móvil +52 1 812 352 4606

Skype: jjjimeneza

[Jamie Reyes]

Jose, The question was geared towards learning how to understand drawings. Where are you from Jose? Just curious.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurJgm0ucqr%2BoLUH%3DUdawXuoy4P4pGBn-zzsmtkSnsFOCNg%40mail.gmail.com.