ISO15614

[Rilley Chellah Mulenga]

Hi welding experts ,

I want to do a welding procedure in accordance to ISO15614, the client material rance from 16mm to 40mm, making reference to take table 7 of ISO15614, would using a 20mm plate support the qualification of the material thickness in question? most especially the 40mm 

--

RILLEY CHELLAH MULENGA Materials Evaluation Head of Department E: rilley....@ahkgroup.com	www.ahkgroup.com

DISCLAIMER: The information in this Internet e-mail is confidential and may be legally privileged. It is intended solely for the addressee(s).
Access to this Internet e-mail by anyone else is unauthorised.

If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
All results and data contained in this document are subject to our Standard Terms and Conditions and are valid only when supported by an original document.

Please visit our website at www.ahkgroup.com

[bavithran samuthralingam]

Hi 

You can select a test piece of 25 mm so that u can get a thickness range from 12.5 mm to 50 mm range 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAHkXHT-4ht_Fd6hUr6doAzU061UEvQtsRaRn--KVd0aHgELgiw%40mail.gmail.com.

[Rilley Chellah Mulenga]

Hi bavithran samuthralingam,

Using a 20mm plate will be too tight for the procedure right ? since it will be borderline  nowonder you suggest 25mm ? very interesting 

To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAB9mKLSayLtGVu%2B2f5z8SM6o9i-VmcPsVmZafBpXA2gZeqDAHA%40mail.gmail.com.

[Edvinas Jonas]

Hi,

yes, 25 mm seems to be the safer option since it qualifies the 12.5–50 mm thickness range.

20 mm would be more borderline for our target range.

To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAHkXHT9pPotn1dXNoUFbPGRvvDRebo5qght9_V6N9sZgTb0u3g%40mail.gmail.com.