On 30-Dec-2023, at 5:10 PM, dia shukr <dias...@gmail.com> wrote:
Hi friendsI have pipe A333 Gr,6 with design minimum temperature (-10C).Will I need to do a toughness test??As you know, depending on table A-1 in ASME B31.3 the minimum temperature is (-50C).Thanks every one
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHQEAU55%2BGZ4WKpR-QGS4jGEOAFmPCzzcSh-0Ry2YmPfoEw-xw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/C28BD71C-4439-448F-AE97-38FA4B4B5588%40gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/C28BD71C-4439-448F-AE97-38FA4B4B5588%40gmail.com.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/87aef01c-241f-4484-a4ea-7422abf8fb47n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHK93nLBQfZ_w05Ubu_%2B7h4ztEiD3_3Gybv40S_H4KRdsKXvsg%40mail.gmail.com.