ü Please consider the environment before printing this email.
"Be the change you wish to see in the world"
---Mahatma Gandhi---
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/101087077.2960395.1424059210045.JavaMail.yahoo%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVgdiQ8QOm4NMuVuOoVMKP%3DWq5Zt_WZLnQVV7bRUV9mANQ%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVjNPvBL%2Bi%2BAo1_rQBdrCxfsd0cdVPwu1%2BxO3C5UmeMjmA%40mail.gmail.com.
Hello
You can use a NDT technique called ultrasound guided waves (UTGW)
This technique can detect a serious kind of defects in pipelines, internal and external. Depending of pipe conditions, this NDT can inspect even 50 meters of pipeline in just one test.
As is based in ultrasonic principle, this use longitudinal and torsional waves to detect indications which are categorized quantifying the transversal loss of area in pipe. As complement, then you can use single beam of ultrasonic thickness measure to check any indication
This can be used with pipeline in service
Attached you can find a little information about this NDT
There are a lot of services in NDT which offer this one
Regards
Miroslav Tadic
Ingeniero de Integridad
CEE
Gerencia de Producción - Mantenimiento
YPFB Chaco S.A.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
materials-weld...@googlegroups.com.
To post to this group, send email to
material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVgdiQ8QOm4NMuVuOoVMKP%3DWq5Zt_WZLnQVV7bRUV9mANQ%40mail.gmail.com.