HARDNESS TEST

[Elavarasan Mech]

Dear all
 

API6A FLANGE which hardness method recommended please guide me

Regard 

ELAVARASAN 

[Deerendra Karanth]

Sir, 

Use Brinell or Rockwell C as per the heat treatment and material type.The test location, frequency, and acceptance criteria must comply with API 6A PSL level (usually PSL 2/3) and material class (AA, BB, CC...).

BR 

Deerendra

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4ykHf%3D_jc7zpJqgC1GYN4UkJ_aMLroy0YsnLNY2TO5oCNQ%40mail.gmail.com.

[George Dilintas]

The standards referenced in API 6A are all for Brinell hardness testing

Δρ. Γεώργιος Διλιντάς

Ηπείρου 5 , Μελίσσια - 15127

Αεροναυπηγος Μηχανικός - Μελος ΤΕΕ 55018

Τηλ +30 210 8100578, +30 6944 646 204

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I,  Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAG0nF9GT77wWr0VUnaNkf4e8-oc%3D88j5Ahvp2mzjmasDofZSHg%40mail.gmail.com.