ASME SEC II PART C

[Elavarasan Mech]

Dear All

  as per ASME SEC II PART C in the welding rod MTC lot class & schedule (LEVEL OF TESTING) specified in the certificates mandatory or not, please guide me.  

Regards 

ELAVARASAN

[Deerendra Karanth]

Mandatory testings must be done per the SFA specification (Lot Class & Schedule).

BR,
Deerendra

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4yko6W8yj8CWpenRLXqh89%3D-yktdFFd0f-ybtXPVBYpHJA%40mail.gmail.com.

[Elavarasan Mech]

Above attached MTC acceptable or not pleaee guide me

To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAG0nF9EMjEqLVR1dcKPHVeEgzRB%2Br5XdeONF_ru3Ue1qsqH0YA%40mail.gmail.com.

[Deerendra Karanth]

MTC appears acceptable; however, kindly confirm if end user specifications or applicable WPS/PQR require any supplementary tests such as impact toughness, intergranular corrosion (IGC), or hardness. All other parameters are in line with Sec II C requirement.

BR

Deerendra 

To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4ym-MKZY8PrCd4JE9nhnuXpm7CwxMa1xuzjNtUzm6iQbdQ%40mail.gmail.com.