WQT ASME/EN 15609-1

[Dileep Kumar]

Dear all

Kindly clarify the below query

 Can we make Welder qualification test as per ASME sec 9 with reference to this WPS which is EN ISO 15609-1 .

Please provide reference.

Note : the project specification as per ASME.

--

 

Dileep Kumar P

[José Juan Jiménez Alejandro]

And because you do not take the option of making a new WPS according to ASME IX, using the same laboratory tests that you already have from your old WPS (EN 15609-1), this assuming that those laboratory tests comply with ASME IX, you are mixing standards indiscriminately, sooner or later it will cause you some kind of problem, if I were your client I would not accept such a thing as qualifying a welder under ASME IX with a WPS EN 15609-1.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFZYTsQbjoVbe3EcE0EuFvG6Xb_412mtwMALnp5UxSZWiMLArQ%40mail.gmail.com.

--

Ing. José Juan Jiménez Alejandro

Independent Consultant in Parts

and Pressure Equipment

SUMMIT MÉXICO - TPI

https://www.linkedin.com/in/summit-m%C3%A9xico-tpi-760047137/

Móvil +52 1 812 352 4606

Skype: jjjimeneza