P-No. in ASME-IX code

[Hany Nabil]

Dear Exports,

as per table QW/QB-422 in ASME-IX code, the P-No. 2 is not used 

Why ?

 Best Regards,

 Eng. Hany Nabil

 Senior Welding Engineer

 Petrofac

 Engineering and Production Service

 Email: eng.han...@gmail.com

 Egypt Mobile: 002-01225622022

This message, including any attachments, may contain confidential and privileged information for the sole use of the intended recipient(s). Review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient, or authorised to receive information on behalf of the recipient, please contact the sender by reply email, and delete all copies of this message. While we have taken reasonable precautions to ensure that this message and any attachments are free from viruses, we cannot guarantee that they are virus free and accept no liability for any damage caused by this message or any attachments. Messages sent or received through our networks may be monitored to ensure compliance with the law, regulation and/or our policies.

[gulzar ali]

Pls fyi

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAP1YJmTbMbEri-cye4ny7kVm63_BykGTZW%3D2X6L%2B_8fLoP6E5w%40mail.gmail.com.

[Sandeep Pr]

Dear Eng. Hany Nabil,

Kindly submit your query using this link

 

https://cstools.asme.org/Interpretation/InterpretationForm.cfm

With Regards,

Sandeep.P.Raghavan

--

[Kannayeram Gnanapandithan]

It was for Cast iron. Now it is totally deleted

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFBEtQotxasERP5F76yJOz48dzjH2sKEQndcz8UX9p6sTz5T3A%40mail.gmail.com.