Simulation heat treatment

[chiluka venkatramulu]

Dear All,

Pl clarify when we need simulated heat treatment for WPS as per ASME Sec-IX.

Thanks & Regards,

Venkatramulu

[Prashant Rane]

Heat treatment is governed by Construction Code. 

Regards,
Prashant

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF98%2BdF9791jG0wTQ%3DmPU5oU1B1QW%2BPVY4Pw2tufxCBF4YSBNg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[PGoswami]

Simulation heat treatment is typically governed by design & construction code. Sec VIII, DIV-2 clearly specifies these requirements, wherever required. DIV-1 is a bit silent about it. As Sec-IX is a “supportive “ code all design & construction codes, it does not call for any such requirement.

Hope this clarifies your query.

 

Thanks.

 

P.Goswami.P.Eng, IWE.

Independent Welding & Metallurgical Specialist

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgos...@quickclic.net,pradip....@gmail.com

Cell/Whasapp:1-905-9793232

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAkMc%3D7MtkfEmGHJMaLNoyrdO9Rxs3Z1Mh7ywJmipudc8BGXdg%40mail.gmail.com.