ERNiCU7 TIG hot wire cladding weldabilty

[Neilash Kumar]

Gents , 

Currently am developing procedure using hot wire TIG process using ERNICU7 CLADDING , 

Thickness of cladding minimum 3.2mm , 2layer only

Fe value to be less than 2.5 after 2 layer .

Can you please share your experience regarding the weldability issue and precaution to take care during weld procedure?

Regards 

Neilashkumar 

[Ramin Kondori]

For overlaying steel, first, apply a barrier layer of nickel-base overlay shall be used first (high Ni%).

Regards

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1722606054.6338032.1559152590346%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.