SA182 F304H TO SA213 TP 321 FILLER WIRE

[sujit kumar]

Dear all,

Greeting for the day.

 What filler wire we should use for the below material?

1.SA182 F304H TO SA213 TP 321.

2. SA213 TP304 TO SA182 F304H.

3. INCONEL 8800 TO SA213 TP304.

[Kannayeram Gnanapandithan]

1, 347H

2.308

3. NiCr3

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ISO 9712 Level 2 in VT,

ASNT-Level II in PT,MT,RT & UT,

LA ISO 9001-2015,

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFonYWPKF6-Vsk%3DRUScM152Gj4MGrOvaRuoJDK%3D8F0srvrLiSw%40mail.gmail.com.

[sujit kumar]

Thank you for your email sir.......I have a query sir  if we use ER-308H is there any issue with that...????

Best Regards.

Sujit Kumar

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eMCrP97bxcRbv8UqV6ZXjgT_yvwqxxFC1gL1kLQt7Egwg%40mail.gmail.com.

[Dinesh Somwanshi]

Sir,

I think operating temperature factor is also important inline to consider the filler material selections and refer project specification may you get the more and specific details .

Thanks

Dinesh

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFonYWNCduDQJSvwug5jhXJ2_SkWyZSf%3DZyquh25stcyk0vptQ%40mail.gmail.com.

--

Thanks & Regards

Engr. Dinesh Vitthal Somwanshi

API 510 - Pressure vessel Inspector

API 570 - Piping Inspector, 

AWS - CWI, CSWIP 3.1*,*BGAS  Gr 2 / 3
NDT II -UT , RT , MT , PT, VT
 00919881344135 India 
Skype = Dinesh somwanshi

असो द्यावी दया तुमच्या लागतसे पाया.

*Pray for others, sometime, You might never need to pray for yourself
again.....*

[Kannayeram Gnanapandithan]

no

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFonYWNCduDQJSvwug5jhXJ2_SkWyZSf%3DZyquh25stcyk0vptQ%40mail.gmail.com.