PWHT thickness

[Raghul]

What is difference between nominal vs control vs governing thickness in PWHT?

Plz explain with one example

[Dinesh Somwanshi]

Dear 

refer ASME II - A ,SA 20 .

Regards

Dinesh

On Thu, Jan 23, 2020 at 12:29 PM Raghul <raghul...@gmail.com> wrote:

What is difference between nominal vs control vs governing thickness in PWHT?

Plz explain with one example

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b9b5d8f1-b94e-4c90-9551-7e941fb5a5b2%40googlegroups.com.

--

Thanks & Regards

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED PIPING / WELDING / NDT / PAINTING INSPECTION PERSONNEL
API 570 - Piping Inspector, AWS - CWI , CSWIP 3.1*,*BGAS  Gr 2 / 3
NDT II -UT , RT , MT , PT, VT
 00919881344135 India 
Skype = dinesh somwanshi

असो द्यावी दया तुमच्या लागतसे पाया.

*Pray for others, sometime, You might never need to pray for yourself
again.....*