- [MW:24330] RE: 24309] PAUT & TOFD Level III - 1 Update
- REPAIR OF METAL LOSS BY COLD WELD (BELZONA) - 1 Update
- Defects on Clad Weld Overlay Material Inco alloy 825 - 1 Update
Shashank Vagal <nach...@yahoo.com>: Feb 20 04:32PM
Again, let me stress this point: to master these techniques you need lot of on the job experience and technical acumen developed therefrom BR,Shashank C Vagal
From: Prasad Ghanekar <prs...@gmail.com>
To: material...@googlegroups.com
Sent: Saturday, 20 February 2016 10:12 AM
Subject: Re: [MW:24330] RE: 24309] PAUT & TOFD Level III
As I understand PAUT & TOFD are NDE UT technics and not NDE methods. Hence NDE Level III in UT is required with training in special technics.Regards
P. V. GhanekarOn 17 Feb 2016 09:39, "pgoswami" <pgos...@quickclic.net> wrote:
Hi Mostafa, These techniques are very specialized techniques. Not allNDE techs are up to speed with both of these techniques. Please see some guidelinesfrom the BINDT on the same. I’m not sure , where you’re located, you may checkwith the local high profile NDE Schools or Companies, who’ll have thosepersonnel in their team Thanks. Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist &Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299pg...@quickclic.netpradip.goswami@gmail.com From:material...@googlegroups.com [mailto:material...@googlegroups.com]
Sent: Tuesday, February 16, 20168:25 AM
To: Materials & Welding
Subject: [MW:24309] PAUT &TOFD Level III DearSir,Kindlyclarify if there is level III in PAUT&TOFD or not. our client insistsfor level III in PAUT&TOFD for PAUT procedure review and level II inPAUT&TOFD to carry out the work. i searched many but i found NO body hasthis certificates. are these certificates true? and how can i get it?--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/855091088.3944591.1455629104764.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/!%26!AAAAAAAAAAAYAAAAAAAAAOT5XfyRhstKvyeqQRSrfFXCgAAAEAAAAI6C/nhitp9NlnqAyYQt%2BycBAAAAAA%3D%3D%40quickclic.net.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEi5r3bb02e17DuzaRdDebdh4JGxca8CVe2--EPFjbSAmxyhGg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Mohamed Elsahhar <mohamed.el...@gmail.com>: Feb 20 07:14PM +0200
dear members ,
i asked if repair codes or standers of pressure equipment allow to
repair metal loss in pressurized equipment with cold weld (BELZONA) if
allow it please give me your reference depending to ASME /API codes or
STD ,thanks for your time
Best Regards
QC/QA eng.
m.elsahhar
israr ahmed <ahmedi...@gmail.com>: Feb 20 10:17AM +0400
Dear all
I witnessed DPT on incolloy 825 Weld Overlay and found some defects Like
LOF, Porosity and undercuts, Defects were repaired by Subcontractor and
offered and found acceptable but after one year again DPT carried out and
found all the defects like porosity, LOF etc.what may be the reason.
Is it possible that Subcontractor used wrong welding procedure to carry out
the repair and after some period defects gets open.
Pls convay your ideas for the above.
--
Israr Ahmed Noor Mohammed
+919930308261
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to materials-weld...@googlegroups.com.