HDPE Piping

[Anand Elankumaran]

Dear Experts,

Could you please provide the standards for HDPE piping materials , Valves and flanges.

As far as I know, only ISO 4427-2 for pipes.

Could you please provide the remaining standards.

--

Thanks and Regards,

E. Anand,

Lead QA-QC,

Sohar,

Oman.

[Perumal Govindan]

Hi

Every manufacturer has also their own manufacturer standards and most of the Client accepts based on their proven track records.

Regards 

Govindan Perumal 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANOYChzsdiw6UOn2AEtLji5La_-nUBdJ7JXwTNnpM1zUu7dUGw%40mail.gmail.com.

[Hisham Mohamed]

Hi,

 Ot depends on your requirement and projects specs.

You may use: 

1. ASTM D3261

Or

2. AWWA as following (most used)

AWWA C 901-02, Standard for PE Pressure Pipe and Tubing, [13 through 76 mm] 0.5 in. through 3 in. for Water Service;

AWWA C 906-99, Standard for PE Pressure Pipe and Fittings, [102 through 1600 mm] 4-in. through 63 in. for Water Distribution and Transmission;

--

[Raghuram Bathula]

EN 12201-3 for fittings

attached TWI presentation gives some insights on HDPE standards, its older one but gives lot of referances

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787

[Kesavamoorthi Rajendiran]

ASTM D2239 --- Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter.


ASTM D2513 --- Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings.


ASTM D2683 --- "Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing"


ASTM D2737--- "Standard Specification for Polyethylene Plastic Tubing"

ASTM D3035 --- "Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter"

ASTM D3261 --- "Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing"

ASTM D3350 --- "Standard Specification for Polyethylene Plastics Pipe and Fittings Materials"

ASTM F714 ---"Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter"

ASTM F1055 --- "Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing"

AWWA C901-17 --- Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service

CSA B137.1 --- Polyethylene (PE) Pipe, Tubing, and Fittings for Cold-water Pressure Services




NSF International Standard 358-1 -' "Polyethylene (HDPE) Pipe and Fittings for Water-Based Ground-Source "Geothermal" Heat Pump Systems"

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787