Doglegs Tolerance

34 views
Skip to first unread message

krishna kamal nayan Pandey

unread,
Jun 17, 2015, 9:58:47 AM6/17/15
to material...@googlegroups.com
Can any body gives permissible tolerance for Dog leg. Whether any standard is covering this tolerance.
 

Best Regards,

 

Krishana Kamal Nayan

QA/QC  Engineer

Weatherford Oil Tool Middle East Ltd. |

Mobile:+964 780 925 0270

Krishan...@ME.Weatherford.com  │ www.weatherford.com

 

cid:image001.png@01CE2FC0.E1E26520

devendar ganapuram

unread,
Jun 22, 2015, 10:34:19 PM6/22/15
to material...@googlegroups.com
Can you specify the pipe spec and what it is used for ? Since you are referring to "line pipe" I presume its the pipe covered in spec API 5L. 
 


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN%2Bgo9CfWqhkWxW80UBPPdRTi4ex%3D5VWFh_yCtkopBzMrA_q2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Babu Kathalingam

unread,
Jun 23, 2015, 3:30:53 AM6/23/15
to material...@googlegroups.com
Presume , you are referring to the Drilling equipments (Like Rams ), if so  in general , It shall come from the OEM spec /Drawing.

Thanks & regards,

K.Babu

--

gaurav

unread,
Jun 23, 2015, 1:34:34 PM6/23/15
to material...@googlegroups.com
Are u talking about the dead legs in refinery piping ???

krishna pandey

unread,
Jun 24, 2015, 9:23:13 AM6/24/15
to material...@googlegroups.com
Yes
From: gaurav
Sent: ‎23-‎06-‎2015 20:34
To: material...@googlegroups.com
Subject: [MW:23109] Re: Doglegs Tolerance

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.

mv_srinivasan

unread,
Jun 24, 2015, 10:48:30 AM6/24/15
to material...@googlegroups.com
Normally 5D of pipe.


Sent from Samsung Mobile
Reply all
Reply to author
Forward
0 new messages