RE: welder qualification

pgos...@rogers.com

unread,

May 30, 2021, 9:44:48 PM5/30/21

to Hany Nabil, material...@googlegroups.com

Please qualify separately in 2G and 5G to have the welder qualified for all positions.

Thanks.

Pradip Goswami.P.Eng, IWE.

Independent Consulting Welding & Metallurgical Engineering Specialist

Saudi Aramco Approved Designated Project Welding Engineer(DPWR)

Qatar Petroleum Approved, SME-Materials & Corrosion Engineering.

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgos...@rogers.com,pradip....@gmail.com

Cell/Whasapp:1-905-9793232

From: Hany Nabil <eng.han...@gmail.com>
Sent: May 30, 2021 3:15 AM
To: material...@googlegroups.com
Subject: welder qualification

Dear All,

It is known that the 6G position qualifies welder for all positions.

If not possible to apply for a 6G position during WQT what are the two positions necessary to qualify a welder for all positions ?

Best Regards,

Eng. Hany Nabi

Welding Engineer

Email: eng.han...@gmail.com

Egypt Mobile: 002-01225622022

This message, including any attachments, may contain confidential and privileged information for the sole use of the intended recipient(s). Review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient, or authorized to receive information on behalf of the recipient, please contact the sender by reply email, and delete all copies of this message. While we have taken reasonable precautions to ensure that this message and any attachments are free from viruses, we cannot guarantee that they are virus free and accept no liability for any damage caused by this message or any attachments. Messages sent or received through our networks may be monitored to ensure compliance with the law, regulation and/or our policies.

Virus-free. www.avg.com

Hany Nabil

unread,

May 30, 2021, 10:59:25 PM5/30/21

to material...@googlegroups.com

Dear All,

It is known that the 6G position qualifies welder for all positions.

If not possible to apply for a 6G position during WQT what are the two positions necessary to qualify a welder for all positions ?

Best Regards,

Eng. Hany Nabi

Welding Engineer

Email: eng.han...@gmail.com

Egypt Mobile: 002-01225622022

This message, including any attachments, may contain confidential and privileged information for the sole use of the intended recipient(s). Review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient, or authorised to receive information on behalf of the recipient, please contact the sender by reply email, and delete all copies of this message. While we have taken reasonable precautions to ensure that this message and any attachments are free from viruses, we cannot guarantee that they are virus free and accept no liability for any damage caused by this message or any attachments. Messages sent or received through our networks may be monitored to ensure compliance with the law, regulation and/or our policies.

Paidi

unread,

May 31, 2021, 12:05:22 AM5/31/21

to material...@googlegroups.com

2G & 5G

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAP1YJmRDNM44i9pQKAFGrp33_%3DfOZD7eror1ugpaunNLcFmvYw%40mail.gmail.com.

--

Thanks & Best Regards,

Suresh Paidi