Process Piping Inspection Code

[Richard robes]

Dear All,

Please advise on what basis code Piping Inspection is done for process piping, Material Inspection is done through B31.3, but based on what we accept Ovality, Indendation like deformities.

Many Regards

Richard

[raouf salhi]

Dear sir;

ovality ,deformities should be inspected according the factory fabrication code ( exp : for API 5L Gr B , according API 5L code ).

Regards

 

 

SALHI Raouf

QA/QC Engineer

Tel: Morocco +212628979891

      Tunisia +21621458258

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADbnFwoEcO1HmgXuP-21L%2Bo1Y2F7bmdJ8gKmQC%3Dofmi4t5hEqg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.