TOFD of SS welding

[Manish Kumar]

Dear Sir,

Please advise as per ASME or other Demonstration of SS welding for TOFD possible or not.

Regards

Manish Kumar

[George Dilintas]

with longitudinal waves only

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHfQ4k5ET5rTKnzG%2B-6c5h42Jo1BBVwhT5dEYR6fCHNkSL3Yug%40mail.gmail.com.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

[Jenish Mistry]

Dear sir ,

Why not possible by transverse waves ??

please clarify..

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40DKwMMdzEYp4iEv-C8YZpY_0pSkfc2YSxHt72kba%2B7kew%40mail.gmail.com.

--

Thanks for your best support.

Regards,

Jenish Mistry

09033476117

[George Dilintas]

Because of attenuation due to coarse grain

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADXbd_d0mqKPoR6EwNJ2apGdQwD0%3D-F%3DkvjqOA9ENtwuD8HJtw%40mail.gmail.com.

[Mohd Siraj]

for austenite SS welding, pl use PAUT with DLA probe or DMA probe.

this brochure is for information only not recommended any brand or manufacturer