R - Stamp

[SENTHILKUMAR SWAMINATHAN]

We have an issue in repair a pressure vessel.

Contractor not capable to do? But contractor is qualified for R-Stamp.

As company can we  go head in welding activities with our qualified welders and we don't want R Stamp - Is it acceptable? Because this activities ongoing in offshore shut down and we cannot wait as per schedule. I day barge cost is 3 million USD

Thanks

Regards,

S.SENTHILKUMAR

[gprak...@gmail.com]

If you don't want R stamp, then any contractor can do the job.

Rgds
 Prakash. G. 
ASME AIS
Independent Consultant. ASME/ISO/PED

From: 'SENTHILKUMAR SWAMINATHAN' via Materials & Welding Sent: Wednesday, 15 June 2016 08:27 To: Materials & Welding Reply To: material...@googlegroups.com Subject: [MW:24946] R - Stamp

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1914300373.2435806.1465964614944.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

[Perumal Govindan]

Dear Senthil

Only solution is discuss with the Client and close if the repair is not connected or in contact with the process medium flow (wet part).

On the otherhand please go through NBR instructions.

Regards
Govindan

--

[Rajagopal Kannan]

Hi Senthil,

If you do the repair, Your U stamp is not valid anymore. If your client accepts that, you may proceed as you do not want R stamp.

Thanks and Best regards,

K.Rajagopal

--

[SENTHILKUMAR SWAMINATHAN]

Here we are the client. There should be some regulatory requirements?Thanks for all your contribution.  

Regards, S.SENTHILKUMAR

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1914300373.2435806.1465964614944.JavaMail.yahoo%40mail.yahoo.com?utm_medium=email&utm_source=footer.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANiuf9eXkjRqVmJZy0aRJ5aTjsuRKH9aLVQg1eYQY_uMSnzABg%40mail.gmail.com?utm_medium=email&utm_source=footer.