90 dig elbow cut in 45 dig

[jamshed...@gmail.com]

can we cut 90 dig elbow in 45 dig please suggest

[dinesh angara]

yes you can

On Mon, Nov 18, 2019 at 4:45 PM <jamshed...@gmail.com> wrote:

can we cut 90 dig elbow in 45 dig please suggest

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/77b6c2ba-f174-492f-9a40-14a26a641658%40googlegroups.com.

[Dinesh Somwanshi]

Dear, 

Please get concession request. 

Dinesh

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANp96nkUTxq-o2B7Rqed6-41EBwnYGq%2BH_Kd5-4s01yFfOC8Cw%40mail.gmail.com.

[atul khatri]

you can cut all the odd angles from 90 degree elbows. So just go ahead 

Best Regards

Atul 

On Mon, Nov 18, 2019 at 4:45 PM <jamshed...@gmail.com> wrote:

can we cut 90 dig elbow in 45 dig please suggest

--

[haren...@gmail.com]

Not advisable

--

[Jaydeep]

Yes, You can proceed.

Regards,
Jaydeep Limbasiya