Impact test requirement for P.No.1.

[Sateesh Babu E]

Dear All,

Please provide ASME sec IX interpretation/clause to solve the below issue.

Backgorund:

Base metal-1 thk : 40 mm (IS 2062 Gr.B)

Base metal -2 Thk : 3 mm (IS 2062 Gr.A)

Filler wire : ER70S-6 (1.2 mm)

Gas : Co2.

Question : Base metal and deposited weld metal thickness range for the above combinations (Impact test is required) ?.

[meisam shokri arfaei]

Impact test is not a requirement related to material or thickness or welding process or something like those.

It's your design code/Spec., which have to mention this requirement.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJ%2Btj09ks%3DHmmOVu%2BujhoTJ7vPJm2yMSraevZdmcwCupTRP27A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

M. Shokri Arfaei

ISA-ISTS - Metallurgy Lab. Manager

ASNT NDT Level III

International Welding Engineer

Tel.: +98 21 66282127

Fax: +98 21 66282779

Mob.:+98 912 1394023