Pressure gauge calibration

[Nishanth Km]

Dears

Please tell which standard telling .25% variation  is allowed in pressure gauge calibration

[Lalu Rajendran]

Hi,

Pressure gauges are designed and calibrated according to ASME B40.100. +0.25% of span is allowed for Grade 3A gauges of pressure range < 600 psi (40 bar).

Regards,

Lalu Rajendran

On Wed, Feb 3, 2016 at 8:54 PM, Nishanth Km <nishan...@gmail.com> wrote:

Dears

Please tell which standard telling .25% variation  is allowed in pressure gauge calibration

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2Ba8N2JFR%3Ddks-f7WYeUJaBW6bxCCNmJndfGt2Bvf2iYKzh0AA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.