Plate Heat Exchanger
Sarang Deo
Tadic, Miroslav
Dear Member!!
As you said, ASME code Sec VIII Div 1 it´s applicable to design heat exchangers, but from the point of view as a pressure vessel, that means the capacity of the equipment to contain the work fluid at operating condition of design (pressure, temperature, metal thickness, material and weld efficiency)
By the other hand, you have another factors to consider in the design as: number of tubes, diameter of tubes, longitudes, diameter, material of tubes. As a guide to define this parameters, there is the TEMA (Tubural Exchanger Manufacturers Association, Inc.) standards whose can be very useful.
Please visit http://www.tema.org/index.html to consult about software and codes
Regards
Miroslav Tadic
Ingeniero de Integridad
CEE
Gerencia de Producción - Mantenimiento
YPFB Chaco S.A.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
materials-weld...@googlegroups.com.
To post to this group, send email to
material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/CAP6P-dZuJF4z10S5B9SDe%2B9ezP7Q%3DNsJs1S2%3DD_U8Hs_wcm5%2BQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Sarang Deo
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/B1C5C970BEA29243935FA5EB72F113C80208BAB5D8%40BOLEXVSG11.chaco.com.bo.
TC Kwa
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAP6P-dbED4EaEH4b%2B5FOMXiWweAppxb3Zr8Yg_TORE%2BZXFCTxA%40mail.gmail.com.