Minimum welder qualification thickness

[bhaskar]

Dear all, 

Good morning.

Thanks in advance for responding.

My question is as per ASME SEX-IX,

MINIMUM WELDER QUALIFICATION THICKNESS RANGE WHERE IT IS GIVEN ?

Best Regards,

BHASKAR.

[hardik desai]

QW-452.1(b)

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/df357b7b-5342-44c9-8a08-3f4ba67b9e7d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[George Dilintas]

there is no minimum deposited metal thickness for the welder. Only maximum to be welded.

The minimum depends only on the applicable WPS

--

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/df357b7b-5342-44c9-8a08-3f4ba67b9e7d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

[Mohd Siraj]

Min as per wps is qualifie And maximum 2t.