WELDER QUALIFICATION

[VISHNUDAS MAVUNKASHERY]

i have doubt..if the procedure qualification is done under ASME SECTION ..  so can i do the welder qualification under AWS D1.1 ???????.

[prem_nautiyal26]

No

Please follow your construction code

Sent from my Samsung Galaxy smartphone.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/49a25c41-9eba-48c5-b9cd-ceabe1732f93%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[VISHNUDAS MAVUNKASHERY]

thanks buddy....one more doubt plz...here we r using plates ASTM A653 G90(GI SHEETS) 1.2mm,1.5mm,2mm,3mm etc...so on which thickness should i make the test coupn for welder qualification inorder to qualify for this thickness range?

On Mon, Feb 13, 2017 at 7:49 AM, 'prem_nautiyal26' via Materials & Welding <material...@googlegroups.com> wrote:

No

Please follow your construction code

Sent from my Samsung Galaxy smartphone.

-------- Original message --------

From: VISHNUDAS MAVUNKASHERY <36vis...@gmail.com>

Date: 12/02/2017 23:34 (GMT+05:30)

To: Materials & Welding <materials-welding@googlegroups.com>

Subject: [MW:26053] WELDER QUALIFICATION

i have doubt..if the procedure qualification is done under ASME SECTION ..  so can i do the welder qualification under AWS D1.1 ???????.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/49a25c41-9eba-48c5-b9cd-ceabe1732f93%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/39o3n8x2jjrtewuu1uwd216b.1486957780346%40email.android.com.

For more options, visit https://groups.google.com/d/optout.

--

VISHNUDAS MURALI MAVUNKASHERY

[Shashank Vagal]

AWS D1.1 does not cover anything less than 1.6 mm thick.

 

Best Regards,

Shashank C Vagal  (Quality Adviser)

Neo Metal-Analyst & NDT Services (Approved by IBR, Thermax, AERB)

Regd Office: 301, PRATHAMESH, M G Rd – Mahant Rd, Vile Parle East, Mumbai 400 057 INDIA

Tel: +91 22 2611 6640 / (+91) 9821386292 /  8082395502 / 9819191861    

Works Office: A-25, Geet Siddhee, Sector No. 11, Pradhikaran, Gat No. 62, Boradewasti, Moshi, Dist: Haveli, PCMC, Pune – 411044, Maharashtra, India   
www.neometalanalystndt.com / enq...@neometalanalystndt.com / nach...@yahoo.com

---

From: VISHNUDAS MAVUNKASHERY <36vis...@gmail.com>
To: material...@googlegroups.com
Sent: Monday, 13 February 2017 11:22 AM
Subject: Re: [MW:26058] WELDER QUALIFICATION

To view this discussion on the web visit https://groups.google.com/d/ msgid/materials-welding/ 39o3n8x2jjrtewuu1uwd216b. 1486957780346%40email.android. com.

For more options, visit https://groups.google.com/d/ optout.

--

VISHNUDAS MURALI MAVUNKASHERY

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAK8EmDRB1BTooYjKQJ0u9Oy2Mn%3D3Z9G56xaEjE_Np5GGtHUEyw%40mail.gmail.com.

[VISHNUDAS MAVUNKASHERY]

and my procedure is tested with RT...should i also test the welder qualification coupn with RT??....any way my product is just a structural sheet work...doesnt comes under pressurized vessels or boilers,,plz help

On Mon, Feb 13, 2017 at 9:52 AM, VISHNUDAS MAVUNKASHERY <36vis...@gmail.com> wrote:

thanks buddy....one more doubt plz...here we r using plates ASTM A653 G90(GI SHEETS) 1.2mm,1.5mm,2mm,3mm etc...so on which thickness should i make the test coupn for welder qualification inorder to qualify for this thickness range?

--

VISHNUDAS MURALI MAVUNKASHERY

[VISHNUDAS MAVUNKASHERY]

thnks ..how abt ASME?.....and is RT mandatory for welder qualification??...can i use other techniques such as DPI

On Mon, Feb 13, 2017 at 10:35 AM, 'Shashank Vagal' via Materials & Welding <material...@googlegroups.com> wrote:

AWS D1.1 does not cover anything less than 1.6 mm thick.

 

Best Regards,

Shashank C Vagal  (Quality Adviser)

Neo Metal-Analyst & NDT Services (Approved by IBR, Thermax, AERB)

Regd Office: 301, PRATHAMESH, M G Rd – Mahant Rd, Vile Parle East, Mumbai 400 057 INDIA

Tel: +91 22 2611 6640 / (+91) 9821386292 /  8082395502 / 9819191861    

Works Office: A-25, Geet Siddhee, Sector No. 11, Pradhikaran, Gat No. 62, Boradewasti, Moshi, Dist: Haveli, PCMC, Pune – 411044, Maharashtra, India   

www.neometalanalystndt.com / enqu...@neometalanalystndt.com / nach...@yahoo.com

---

From: VISHNUDAS MAVUNKASHERY <36vis...@gmail.com>

To: materials-welding@googlegroups.com

Sent: Monday, 13 February 2017 11:22 AM
Subject: Re: [MW:26058] WELDER QUALIFICATION

thanks buddy....one more doubt plz...here we r using plates ASTM A653 G90(GI SHEETS) 1.2mm,1.5mm,2mm,3mm etc...so on which thickness should i make the test coupn for welder qualification inorder to qualify for this thickness range?

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAK8EmDRB1BTooYjKQJ0u9Oy2Mn%3D3Z9G56xaEjE_Np5GGtHUEyw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/900389995.2874751.1486967702956%40mail.yahoo.com.

For more options, visit https://groups.google.com/d/optout.

--

VISHNUDAS MURALI MAVUNKASHERY

[George Dilintas]

all qualifications should be coherant

2017-02-12 20:04 GMT+02:00 VISHNUDAS MAVUNKASHERY <36vis...@gmail.com>:

i have doubt..if the procedure qualification is done under ASME SECTION ..  so can i do the welder qualification under AWS D1.1 ???????.

--

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/49a25c41-9eba-48c5-b9cd-ceabe1732f93%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

[Mohd Siraj]

No.
Don't mix n confuse the code.