Eddy Current vs Hydrotest for LTCS pipes (A333 Gr.6)
Eric.C
Ritesh Rajput
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/725e2e6d-7969-4d55-ab84-a02452545612%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
george....@gr.bureauveritas.com
Yes if performed in accordance with the requirements of A-999
best regards
Dr. Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE
Tel: +30 210 40 63 113 /4 /5
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
"Eric.C" ---07/05/2015 08:43:18---Hi All, Mill performed ET for 1.5" Sch160 Smls Pipe A333 Gr.6.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/725e2e6d-7969-4d55-ab84-a02452545612%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
Alan Denney
I have now looked at ASTM A 333 and see that eddy current testing is permitted as an alternative to hydrostatic testing under this standard. It goes to show – if all else fails read the specification!
From: Alan Denney [mailto:al...@denney1.freeserve.co.uk]
Sent: 07 May 2015 08:25
To: 'material...@googlegroups.com'
Subject: RE: 23220] Eddy Current vs Hydrotest for LTCS pipes (A333 Gr.6)
No. Eddy current test is a surface inspection technique – technically an alternative to MPI.
From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Eric.C
Sent: 07 May 2015 02:25
To: material...@googlegroups.com
Subject: [MW:23220] Eddy Current vs Hydrotest for LTCS pipes (A333 Gr.6)
Hi All,
--