Pulsing current in wps ------ (What to fill in this area)

[madheswaran s]

Dear Experts, 

What to write the in the wps , where pulsing current ------- mentioned

iF i use SMAW process in wps pulsing current -------

iF i use GTAW process in wps pulsing current -------

iF i use SAW process in wps pulsing current -------

iF i use GMAW process in wps pulsing current -------

What to write for each procss , 

Can one one tell the answers as mentioned avove.(Applicable/not applicable/none/yes etc.)

Thanks.

Madheswaran.S

[james gerald]

SMAW & SAW no Pulsing.

Only GTAW & GMAW pulsing.

It depends on your Machine capability in adjusting the below.

Peak current & Time

Background Current & Time

Upslope & Downslope

Thanks & Regards

J.Gerald Jayakumar

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/36fd9ece-5234-42e9-b1e1-fd3900b1d214n%40googlegroups.com.

[james gerald]

Though Pulsing is mentioned as a non-essential variable for GTAW, WPS is a document for Welder to follow apart from Approving. Hence necessary details shall be mentioned.

Thanks & Regards

J.Gerald Jayakumar

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/228151060.2128663.1658311276651%40mail.yahoo.com.