Regarding Post Baking

[Mohit Aggarwal]

Dear Experts,

For material SA335 P5 and SA 335 P9 for.how.much time and at what  temperature post heating is required 

Thk of SA335P5 is 16mm

And thk 9f SA335 P9 is 20mm.

Regards,

Mohit Aggarwal 

9821958461

[George Dilintas]

usually 1 hour at least.

Temperature 200 degC

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALTezPMidDbxdgWoJOQvjt51ZVuRw3PrDkeDxA%2BmYs%3DK%2Bg5QuQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

[Prasad Rode]

Yes, post heating for 1 hr only.

[CHINTUKUMAR GANDHI]

Dear Sir,

Recommended post heat temp. is 350º C for 2 hours or alternatively preheat shall be maintained without interruption util the start of PWHT.

Regards,

C. R. GANDHI

---

From: Mohit Aggarwal <aggarwa...@gmail.com>
To: materials-welding <material...@googlegroups.com>
Sent: Wednesday, April 5, 2017 2:19 PM
Subject: [MW:26359] Regarding Post Baking

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.