Weld Quality Inspection

Amit Singh

unread,

Apr 13, 2021, 10:25:03 PM4/13/21

to material...@googlegroups.com

Dear Experts,

What is the acceptable weld bead reinforcement and allowable penetration in the GMAW welding process? Any specific code for structural welding. Please suggest.

Joint design- Fillet Type

Plate thickness- 8mm to 32mm

Material Grade- IS2062 E350C

Thank you in advance.

Regards,

Amit Singh

Harish Kannepalli

unread,

Apr 13, 2021, 10:28:52 PM4/13/21

to material...@googlegroups.com

Hi,

Please follow ISO 5817 for weld quality levels. However this has to be documented in your or end user SOP.

Regards,
Harish Kumar

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKBY_CEcnyT2Z_2Cnu3yFT_LYBhJRwJ%3Dy1Dp2rzq9YLm4PUVow%40mail.gmail.com.

james gerald

unread,

Apr 14, 2021, 12:45:05 AM4/14/21

to material...@googlegroups.com

For a Fillet weld, it is based on the Throat size and Leg size and the required profile as convex or concave as Applicable

Thanks & Regards

J.Gerald Jayakumar

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAE4SttFQPkMa-a2SoyqS_sGG-BpBumZmVg8Dfx3kZUNYawfRcA%40mail.gmail.com.

Mac Palola

unread,

May 31, 2021, 12:07:25 AM5/31/21

to Materials & Welding

0.7 x leg length

Sandeep Pr

unread,

May 31, 2021, 12:36:31 AM5/31/21

to material...@googlegroups.com

Dear Friend,

If you are following AWS D1.1 for structural steel inspection , Just Refer the table 8.1 of 2020 Edition. There they have mentioned weld profile shall be in conformance with clause 7.23. Hope that clause can guide you.