Mdmt of carbon steel pipe for impact test

[mervin dio]

Dear expert,

What is the required minimum temperature for piping {ei. Carbon steel pipe} to do impact test and please let me know where i can get this standard.


Regrds

MERVIN

[GALAXY INDUSTRIES PRASHANT PANCHAL]

Dear all,

Kindly let me know the filler wire to be used for welding SA 240 TP 304 to SA 276 TP 310 material & SA 276 TP 310 to SA 276 TP 310 Material

Thanks & Regards,

Prashant Panchal

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/D9EA8DC3-B050-49CA-8706-B751739B0B3C%40yahoo.com.

Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations.

For more options, visit https://groups.google.com/d/optout.

Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations.

[Perumal Govindan]

Hi Marvin,

Please refer your Client Specification, if it's not there refer your project or Client approved "Piping Material Specification " (PMS) for MDMT.

--

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/D9EA8DC3-B050-49CA-8706-B751739B0B3C%40yahoo.com.

[saju varughese]

read chapter 3 323.2 ASME B31.3

[محمد اشتیاق ھاشم علی‎]

Specify complete material specification and grade.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/D9EA8DC3-B050-49CA-8706-B751739B0B3C%40yahoo.com.
For more options, visit https://groups.google.com/d/optout.

--

Best Regards

Muhammad Ishtiaq

Saudi Aramco PID (ABSG),

Naphtha processing & Aromatics Complex

RFP-66,Package-12

Jizan Refinery-KSA

[Kannayeram Gnanapandithan]

308 and 310

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Sat, Feb 11, 2017 at 12:14 PM, GALAXY INDUSTRIES PRASHANT PANCHAL <pipa...@live.com> wrote:

This message is eligible for Automatic Cleanup! (pipa...@live.com) Add cleanup rule | More info

Dear all,

Kindly let me know the filler wire to be used for welding SA 240 TP 304 to SA 276 TP 310 material & SA 276 TP 310 to SA 276 TP 310 Material

Thanks & Regards,

Prashant Panchal

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/D9EA8DC3-B050-49CA-8706-B751739B0B3C%40yahoo.com.

Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations.

For more options, visit https://groups.google.com/d/optout.

Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BL2PR17MB0833E556E9F0809143B645C4C3470%40BL2PR17MB0833.namprd17.prod.outlook.com.

[GALAXY INDUSTRIES PRASHANT PANCHAL]

can we use ER 309 filler wire for welding SA 240 TP 304 to SA 276 TP 310.

& ER 347 filler wire for welding SA 276 TP 310 to SA 276 TP 310.

Regards,

Prashant Panchal

---

From: material...@googlegroups.com <material...@googlegroups.com> on behalf of Kannayeram Gnanapandithan <kgpan...@gmail.com>
Sent: Saturday, February 11, 2017 12:33:33 PM
To: materials-welding
Subject: Re: [MW:26038] Filler wire for welding SA 240 TP 304 to SA 276 TP 310 Mateial

 

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePTL0HcNS4Z3qTa64cO%3Dw27WjkFke3KSE%3DsRskfWWgKSA%40mail.gmail.com.

[Kannayeram Gnanapandithan]

309ok and 310 only( 347 stabilised one)

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Sat, Feb 11, 2017 at 1:07 PM, GALAXY INDUSTRIES PRASHANT PANCHAL <pipa...@live.com> wrote:

This message is eligible for Automatic Cleanup! (pipa...@live.com) Add cleanup rule | More info

can we use ER 309 filler wire for welding SA 240 TP 304 to SA 276 TP 310.

& ER 347 filler wire for welding SA 276 TP 310 to SA 276 TP 310.

Regards,

Prashant Panchal

---

From: materials-welding@googlegroups.com <materials-welding@googlegroups.com> on behalf of Kannayeram Gnanapandithan <kgpan...@gmail.com>

Sent: Saturday, February 11, 2017 12:33:33 PM
To: materials-welding

Subject: Re: [MW:26038] Filler wire for welding SA 240 TP 304 to SA 276 TP 310 Mateial

 

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePTL0HcNS4Z3qTa64cO%3Dw27WjkFke3KSE%3DsRskfWWgKSA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BL2PR17MB08336C44D3CE01CD635A9FE8C3470%40BL2PR17MB0833.namprd17.prod.outlook.com.

[muthu barathi]

Dear Sir,


you can get it from your construction code. ASME Section II part A


Thanking You.

With Warm Regards,

Muthu Barathi P.
Mobile : +9184695933

Sent from RediffmailNG on Android

From: <malikis...@gmail.com>
Sent: Sat, 11 Feb 2017 12:29:23 GMT+0530
To: "material...@googlegroups.com" <material...@googlegroups.com>
Subject: Re: [MW:26032] Mdmt of carbon steel pipe for impact test

Specify complete material specification and grade.

On Friday, February 10, 2017, 'mervin dio' via Materials & Welding <material...@googlegroups.com> wrote:

Dear expert,

 What is the required minimum temperature for piping {ei. Carbon steel pipe} to do impact test and please let me know where i can get this standard.


Regrds

MERVIN

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to www.rediffmail.com/cgi-bin/red.cgi?red=javascript:;&rdf=BT1VIlUmA24GLgcMBDVXYlt6UTQLJAdqVGU=" on-click="_e(event, 'cvml', 'materials-weld...@googlegroups.com')" target='_blank' rel=external>materials-weld...@googlegroups.com.
To post to this group, send email to www.rediffmail.com/cgi-bin/red.cgi?red=javascript:;&rdf=VGwEcwNwVzoCKgYNUGEDNlFwUDUKJQNuWGk=" on-click="_e(event, 'cvml', 'material...@googlegroups.com')" target='_blank' rel=external>material...@googlegroups.com.
To view this discussion on the web visit https:roups.google.com/d/msgid/materials-welding/D9EA8DC3-B050-49CA-8706-B75173...@yahoo.com.

For more options, visit https://groups.google.com/d/optout.

--

Best Regards

Muhammad Ishtiaq

Saudi Aramco PID (ABSG),

Naphtha processing & Aromatics Complex

RFP-66,Package-12

Jizan Refinery-KSA

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACeCfEc=zP64ixQaJY3aXusYaXkTe6=wXfuK+VdY...@mail.gmail.com.