SS 310 tubes to SS 316L
hvala...@gmail.com
AMOL G
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/2393ab33-b01f-4184-b4a7-75381dce4cban%40googlegroups.com.
manish kulkarni
james gerald
Thanks & Regards
J.Gerald Jayakumar
0091-8838619635
Ashishranjan - Domech Fabricators Pvt.Ltd.
Regards,
Ashish Ranjan
Save a tree...Please consider your environmental responsibility. Before printing this e-mail message, ask yourself whether you really need a hardcopy.
"Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s), are confidential and may be privileged. If you are not the intended recipient, you are hereby notified that any review, re-transmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this message and any attachments from your system.
Virus Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this email. The company cannot accept responsibility for any loss or damage arising from the use of this email or attachment."
Caution: The e-mail below is from an external source. Please do not open attachments or click links unless this email comes from a known sender and you know the content is safe. |
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1407057903.1017722.1786445722486%40mail.yahoo.com.
Ashishranjan - Domech Fabricators Pvt.Ltd.
If the operating temperature is high, I would seriously consider ERNiCr-3 (Alloy 82) rather than trying to solve the problem by moving from ER310 → ER309LMo.
Nickel-alloy fillers are frequently used for difficult dissimilar-metal joints because they tolerate the chemistry gradient/dilution between different alloys and can provide a more forgiving weld-metal structure. This is especially relevant if PWHT or substantial thermal cycling is involved.
Regards,
Ashish Ranjan
Save a tree...Please consider your environmental responsibility. Before printing this e-mail message, ask yourself whether you really need a hardcopy.
"Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s), are confidential and may be privileged. If you are not the intended recipient, you are hereby notified that any review, re-transmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this message and any attachments from your system.
Virus Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this email. The company cannot accept responsibility for any loss or damage arising from the use of this email or attachment."
Caution: The e-mail below is from an external source. Please do not open attachments or click links unless this email comes from a known sender and you know the content is safe. |
--
Kannayeram Gnanapandithan
--