RE: nominal thickness

[pgoswami]

It would the vertical weld thickness,or the depth of the groove being welded.

In this case, 40mm.

These days, all codes have electronic versions, type in your query keywords in the search box, you'll end up with tons of answers & related explanations. 

Thanks. 

P.Goswami, P.Eng, IWE.

Sent from my Bell Samsung device over Canada's largest network.

[m zareei]

What is the nominal thickness (for using in ucs-56) when two parts connected together are the same as in the following figure? Please answer with its standard reference.

 

[Prakash Hegde]

Hi

Nominal the is to be considered as weld metal the for deciding Pwht soak time

Regards

Hegde

Sent from Yahoo Mail on Android

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANBpwvXnitxStVHzpMmrKbRD7cXznfNbX_X%2B%2Bp5zj5mjAjJsWw%40mail.gmail.com.

[james gerald]

Check uw-40

Sent from Yahoo Mail on Android

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1081246884.886066.1644809488391%40mail.yahoo.com.

[Mohd Siraj]

your case, it's 40mm.

however, pl note your WPS shall cove both thickness ranges i.e 62mm & 40mm.