procedure qualification fillet test by brazing (AWS/ASME)

chris

unread,

Jul 27, 2020, 5:40:09 AM7/27/20

to Materials & Welding

Hi all;

Can i qualify a fillet joint by brazing. I can't find the suitable clause in ASME QB section.

Please advise.

Regards

Chris

Rajnish Dixit

unread,

Jul 30, 2020, 7:50:23 AM7/30/20

to material...@googlegroups.com

Hi Chris,

You are right. The positions in brazing hase been defined based on flow. Please refer QB-460 (you might have already referred.

Thanks,
Best Regards,
Rajnish Dixit

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/027f91a7-b19c-4b96-bce7-6b11c18e8abfo%40googlegroups.com.

in...@pieper-qsi.nl

unread,

Jul 30, 2020, 7:50:28 AM7/30/20

to 'Rajnish Dixit' via Materials & Welding

Thank you for your e-mail, unfortunately I’m out of office till Monday August 10th . In the meantime I will have minimum access to my e-mail account. When you didn’t receive an response before this date I will answer your e-mail on Monday August 10th.

Best Regards,

Herman Pieper

Reply all

Reply to author

Forward