Looking for a solid model for a cramps board

unread,

May 4, 2019, 5:12:06 PM5/4/19

to Machinekit

I was looking for a solid model for a cramps board to design an enclosure around. Any chance someone has one?

Tom

unread,

May 4, 2019, 5:55:18 PM5/4/19

to machi...@googlegroups.com

On 5/4/2019 4:12 PM, Tom M wrote:
> I was looking for a solid model for a cramps board to design an enclosure around. Any chance someone has one?

Michael Brown should have one. He sent a PR updating the CRAMPS board
files to support KiCad V5 so he could generate a 3D model:

https://github.com/cdsteinkuehler/bobc_hardware/pull/5

--
Charles Steinkuehler
cha...@steinkuehler.net

unread,

May 7, 2019, 10:18:25 AM5/7/19

to Machinekit

On Saturday, 4 May 2019 23:12:06 UTC+2, Tom M wrote:

I was looking for a solid model for a cramps board to design an enclosure around. Any chance someone has one?
Tom

Since It takes a considerable amount of time to generate the .step file via Freecad stepup wb I attach the files generated by:

kicad and Freecad plus the 0.18 project file for comparison (don't blame me about the odd colours in the step files...).

Since the files were too large here's a link instead:

unread,

May 7, 2019, 10:29:48 AM5/7/19

to Machinekit

or:

unread,

May 7, 2019, 9:00:05 PM5/7/19

to Machinekit

Thanks... Looks great.

Reply all

Reply to author

Forward