Oudie N not displaying Flarm traffic. Suggestions?

[Phil Umphres]

So I have a PowerFlarm hard wired to a Naviter S10 and both connected by Bluetooth to a new Oudie N. Try as I can, I am unable to get the Oudie to display Flarm traffic, which I was receiving fine on my old Oudie 2 Lite. Suggestions? Should the Oudie N be configured to receive Bluetooth data from both the Flarm and the S10 or are the device signals conflicting with each other? What settings should I check? (Apologies if there was an earlier thread on this I missed.) - Phil Umphres

[Paul Remde]

Hi Phil,

 

No.  Don’t connect the Oudie N to the PowerFLARM Fusion over Bluetooth.  The S10 will forward the FLARM data to the Oudie N.  Having the Oudie N receive FLARM data both directly from the Fusion over Bluetooth and from the S10 over Bluetooth would be redundant.  It would make the Oudie N need to decipher the same traffic data twice – which would be a waste of the Oudie N’s processor power and time.

 

Best Regards,

 

Paul Remde
Cumulus Soaring, Inc.

--
You received this message because you are subscribed to the Google Groups "LXNav Soaring Glider Equipment User Discussion Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lxnav-user-gro...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/lxnav-user-group/2421c49b-5505-4ec1-a70b-7ad4d852ac72n%40googlegroups.com.

[Martin Clark]

I have an Oudie N that receives Flarm data from my 9070 via a dongle, it used to work fine now the Flarm data doesn't appear on the Oudie. There is a NMEA data stream on the Oudie so it looks like the data is reaching it. I'm running the 3.11.0+3638 version firmware. Naviter are investigating.