Question regarding LS-DYNA warping beam setup (ELFORM = 11)

22 views
Skip to first unread message

Rija Baritiana

unread,
Aug 14, 2026, 6:55:06 AMAug 14
to LS-DYNA2

Hello everyone,

I am currently working on an LS-DYNA model containing open cross-section profiles (such as I beams and sigma purlin) meshed with 1D beam elements, and I want to account for cross-sectional warping using the ELFORM = 11 formulation (*SECTION_BEAM combined with *INTEGRATION_BEAM).

as specified in the official LS-DYNA documentation, implementing warpage requires the setup of dedicated scalar nodes (*NODE_SCALAR). These scalar nodes must be explicitly created and assigned to each element using the WARPAGE option on the *ELEMENT_BEAM card via the SN1 and SN2 variables.

I have a few questions regarding the practical implementation of this setup:

  1. Nodal Continuity: To ensure continuity of warping and bimoment between two adjacent beam elements sharing the same 3D geometric node, is it correct to have them point to the exact same scalar node at that intersection?

  2. Visualization in LS-PrePost: When using the Beam Prism display mode, I visually notice a relative free rotation or discontinuity between elements. Is this merely a graphical post-processor artifact related to the skin rendering, or does it indicate an improper transmission of the 7th DOF?

  3. Boundary Conditions: To apply a complete fixed support with restrained warping, is it sufficient to constrain both the geometric DOFs (1 to 6) and the associated scalar node DOF at that specific support?

References Request: If anyone can point me toward specific tutorials, documentation examples, technical papers, or conference proceedings detailing the practical implementation of ELFORM = 11 and *NODE_SCALAR for warping beams in LS-DYNA, I would greatly appreciate it.

If any of you have successfully used this formulation on complex structures, your feedback or best practices would also be extremely helpful.

Thanks in advance for your help!

RRB

James Kennedy

unread,
Aug 14, 2026, 12:51:13 PMAug 14
to Rija Baritiana, LS-DYNA2

Dear Rija,

 

See if the following might be of some help:

 

https://lsdyna.ansys.com/wp-content/uploads/2025/02/recent-developments-in-ls-dyna-2.pdf

 

Best,

Jim Kennedy

 

From: ls-d...@googlegroups.com [mailto:ls-d...@googlegroups.com] On Behalf Of Rija Baritiana
Sent: Friday, August 14, 2026 5:55 AM
To: LS-DYNA2 <ls-d...@googlegroups.com>
Subject: [LS-DYNA2] Question regarding LS-DYNA warping beam setup (ELFORM = 11)

 

Hello everyone,

I am currently working on an LS-DYNA model containing open cross-section profiles (such as I beams and sigma purlin) meshed with 1D beam elements, and I want to account for cross-sectional warping using the ELFORM = 11 formulation (*SECTION_BEAM combined with *INTEGRATION_BEAM).

as specified in the official LS-DYNA documentation, implementing warpage requires the setup of dedicated scalar nodes (*NODE_SCALAR). These scalar nodes must be explicitly created and assigned to each element using the WARPAGE option on the *ELEMENT_BEAM card via the SN1 and SN2 variables.

I have a few questions regarding the practical implementation of this setup:

1.      Nodal Continuity: To ensure continuity of warping and bimoment between two adjacent beam elements sharing the same 3D geometric node, is it correct to have them point to the exact same scalar node at that intersection?

2.      Visualization in LS-PrePost: When using the Beam Prism display mode, I visually notice a relative free rotation or discontinuity between elements. Is this merely a graphical post-processor artifact related to the skin rendering, or does it indicate an improper transmission of the 7th DOF?

3.      Boundary Conditions: To apply a complete fixed support with restrained warping, is it sufficient to constrain both the geometric DOFs (1 to 6) and the associated scalar node DOF at that specific support?

References Request: If anyone can point me toward specific tutorials, documentation examples, technical papers, or conference proceedings detailing the practical implementation of ELFORM = 11 and *NODE_SCALAR for warping beams in LS-DYNA, I would greatly appreciate it.

If any of you have successfully used this formulation on complex structures, your feedback or best practices would also be extremely helpful.

Thanks in advance for your help!

RRB

--
You received this message because you are subscribed to the Google Groups "LS-DYNA2" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ls-dyna2+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ls-dyna2/83d57324-db0e-4644-89c3-fb10942b473an%40googlegroups.com.

l...@schwer.net

unread,
Aug 14, 2026, 2:09:14 PMAug 14
to Rija Baritiana, LS-DYNA2

I have never used beam elements with wrapping, but a Google search using “ls-dyna warped beam elements” provided this ANSYS “example” input:

 

https://innovation.ansys.com/public/forum/topics/ls-dyna-example-verification-keyword-files-for-warped-beam-element-formulation-ext

 

                                --len

From: ls-d...@googlegroups.com <ls-d...@googlegroups.com> On Behalf Of James Kennedy
Sent: Friday, August 14, 2026 9:51 AM
To: 'Rija Baritiana' <ribarit...@gmail.com>; LS-DYNA2 <ls-d...@googlegroups.com>
Subject: RE: [LS-DYNA2] Question regarding LS-DYNA warping beam setup (ELFORM = 11)

 

Dear Rija,

 

See if the following might be of some help:

 

https://lsdyna.ansys.com/wp-content/uploads/2025/02/recent-developments-in-ls-dyna-2.pdf

 

Best,

Jim Kennedy

 

From: ls-d...@googlegroups.com [mailto:ls-d...@googlegroups.com] On Behalf Of Rija Baritiana
Sent: Friday, August 14, 2026 5:55 AM
To: LS-DYNA2 <ls-d...@googlegroups.com>
Subject: [LS-DYNA2] Question regarding LS-DYNA warping beam setup (ELFORM = 11)

 

Hello everyone,

I am currently working on an LS-DYNA model containing open cross-section profiles (such as I beams and sigma purlin) meshed with 1D beam elements, and I want to account for cross-sectional warping using the ELFORM = 11 formulation (*SECTION_BEAM combined with *INTEGRATION_BEAM).

as specified in the official LS-DYNA documentation, implementing warpage requires the setup of dedicated scalar nodes (*NODE_SCALAR). These scalar nodes must be explicitly created and assigned to each element using the WARPAGE option on the *ELEMENT_BEAM card via the SN1 and SN2 variables.

I have a few questions regarding the practical implementation of this setup:

  1. Nodal Continuity: To ensure continuity of warping and bimoment between two adjacent beam elements sharing the same 3D geometric node, is it correct to have them point to the exact same scalar node at that intersection?
  1. Visualization in LS-PrePost: When using the Beam Prism display mode, I visually notice a relative free rotation or discontinuity between elements. Is this merely a graphical post-processor artifact related to the skin rendering, or does it indicate an improper transmission of the 7th DOF?
  1. Boundary Conditions: To apply a complete fixed support with restrained warping, is it sufficient to constrain both the geometric DOFs (1 to 6) and the associated scalar node DOF at that specific support?

References Request: If anyone can point me toward specific tutorials, documentation examples, technical papers, or conference proceedings detailing the practical implementation of ELFORM = 11 and *NODE_SCALAR for warping beams in LS-DYNA, I would greatly appreciate it.

If any of you have successfully used this formulation on complex structures, your feedback or best practices would also be extremely helpful.

Thanks in advance for your help!

RRB

--
You received this message because you are subscribed to the Google Groups "LS-DYNA2" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ls-dyna2+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ls-dyna2/83d57324-db0e-4644-89c3-fb10942b473an%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "LS-DYNA2" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ls-dyna2+u...@googlegroups.com.

James Kennedy

unread,
Aug 14, 2026, 4:15:52 PMAug 14
to Rija Baritiana, LS-DYNA2

Dear Rija,

 

You might find this of some interest.

 

Battini, J.-M., “Co-rotational Beam Elements in Instability Problems”, PhD Thesis, Department of

Mechanics, Royal Institute of Technology, Stockholm, Sweden, January, 2002.

 

https://www.mech.kth.se/thesis/2002/phd/phd_2002_jean-marc_battini.pdf

 

Sincerely,

James M. Kennedy

KBS2 Inc.

August 14, 2026

 

 

From: ls-d...@googlegroups.com [mailto:ls-d...@googlegroups.com] On Behalf Of James Kennedy


Sent: Friday, August 14, 2026 11:51 AM
To: 'Rija Baritiana' <ribarit...@gmail.com>; LS-DYNA2 <ls-d...@googlegroups.com>

Reply all
Reply to author
Forward
0 new messages