Axial spikes in 2D axisymmetric ALE spherical blast model

35 views
Skip to first unread message

张胜

unread,
Sep 18, 2026, 3:22:35 AMSep 18
to LS-DYNA2

Hi everyone,

I am modeling a spherical TNT charge in air using a 2D axisymmetric MM-ALE model. The symmetry axis is x=0, and both the charge center and detonation point are located on the axis.

During shock-wave propagation, I consistently observe two abnormal pressure spikes along the axial direction, as shown in the attached figure. The remaining shock front is almost circular.

I have tested different *CONTROL_ALE settings (METH, AFAC, NADV, MMGPREF), changed the detonation-point location, and refined the mesh near the axis. The charge-region mesh is about 1 mm, but the spikes remain.

Interestingly, when I constrain the axial nodes with DOFY=1, the spikes disappear. I am unsure whether this boundary condition is appropriate or whether it is simply suppressing a numerical instability.

Has anyone seen this behavior in a 2D axisymmetric ALE blast model? Could it be related to the symmetry-axis boundary condition, ALE advection, or the treatment of cells next to the axis?

Any suggestions would be greatly appreciated.

Thanks!

3e1160eb-dbd7-4059-b7be-4223d634d462.png屏幕截图 2026-09-18 151256.png屏幕截图 2026-09-18 151530.png

l...@schwer.net

unread,
Sep 18, 2026, 11:29:28 AMSep 18
to 张胜, LS-DYNA2

Because axisymmetric element formulations for all type of elements, use a formulation involving 1/r, there is a potential singularity near the Y-axis as the integration point approached r=0.

 

This is why there are two ELFORM options on the *SECTION_ALE2D keyword: one for area and one for volume weighting.

 

You might experiment with these two options.      –len

 

PS – I doubt setting DOFY=1 is a good thing, but I have never tried your idea.

--
You received this message because you are subscribed to the Google Groups "LS-DYNA2" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ls-dyna2+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ls-dyna2/7ff8f537-d403-4efa-8570-30c26c8508d3n%40googlegroups.com.

image001.png
image002.png
image003.png
Reply all
Reply to author
Forward
0 new messages