Faulty acceleration response

26 views
Skip to first unread message

OWAIS UL HASSAN

unread,
Aug 20, 2026, 4:02:18 AMAug 20
to LS-DYNA2
I would really appreciate suggestions:

The applied ground acceleration in my model is around 0.4–0.45 g, and the global/part-wise acceleration response of the structure looks quite reasonable. However, when I extract nodal accelerations, some nodes show extremely high instantaneous values, of the order of: (10^3 m/s^2~100 g).

The model contains rigid masonry components and deformable timber components, with *CONTACT_AUTOMATIC_SURFACE_TO_SURFACE interfaces. For example, one of the contacts is:

*CONTACT_AUTOMATIC_SURFACE_TO_SURFACE_ID
$#     cid                                                                 title
         1                                                                      
$#   surfa     surfb  surfatyp  surfbtyp   saboxid   sbboxid      sapr      sbpr
        32         1         0         0         0         0         0         0
$#      fs        fd        dc        vc       vdc    penchk        bt        dt
       0.4       0.4       0.0       0.0       0.1         0       0.0     100.0
$#    sfsa      sfsb      sast      sbst     sfsat     sfsbt       fsf       vsf
       1.0       1.0       0.0       0.0       1.0       1.0       1.0       1.0

I would be grateful if anyone could share their experience for this problem.

l...@schwer.net

unread,
Aug 21, 2026, 9:05:09 AMAug 21
to OWAIS UL HASSAN, LS-DYNA2

Perhaps you should consider a longer term view of nodal acceleration, rather than instantaneous.

 

Use one of the Filters in the PlotWindow to smooth your nodal acceleration history.                  --len

--
You received this message because you are subscribed to the Google Groups "LS-DYNA2" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ls-dyna2+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ls-dyna2/715a299c-397a-4f25-8f9e-33a95de95552n%40googlegroups.com.

Reply all
Reply to author
Forward
0 new messages