Hello
Since the Config 13 upgrade I receive a "SD card write load high" error notification.
This is an official loxone sd card (buy in 2018) with a loxone server gen 1.
I don't add new statistics when flashing this upgrade.
I remove a lot of statistics, check the cpu usage (17% in debug mode), card space left is 93%.
I made the loxone check (seems ok).
SD card test seems ok:
<LL control="dev/sys/sdtest" value="SD Performance: Read: 411kB/s, Write: 197kB/s, No error (0 0), ManufacturerId: 2, Date 2017/2, CardType 2, BlockSize 512, Erase 0, MaxTransferRate 25000000, RwFactor 2, ReadSpeed 22222222Hz, WriteSpeed 22222222Hz, MaxReadCurrentVDDmin 3, MaxReadCurrentVDDmax 5, MaxWriteCurrentVDDmin: 0, MaxWriteCurrentVDDmax: 5, Usage: 6.32%" Code="200"/>
I got some other microsd card at home but no one is working with the loxone server.
What can I do to check the sd card (or may be it is a bug in loxone?)